About this item
【LCD Digital Electronic Soldering Iron】The soldering iron with high definition LCD screen display which indicates the temperature status more clearly. With the temperature knob on electronic soldering gun, you can adjust the temperature from 200℃ - 450℃.
【Exclusive Patent Design】The four ventilation holes on the solder tip and four ventilation holes on pipe provide better heat dissipation than others. Power consumption lower than ordinary soldering iron which is more Energy-efficient and enviroment protection.
【High-Power Heating Core】The 80W soldering iron heats up quickly with a Inner-heated ceramic technology, high temperature stability, can protect your welding objects.
【Durable in Use】Superior professional Soldering iron tools has 5 multiple tips replacement which are oxidation resisting and it won’t rust easily while immersing in water.
【Widely Used】The soldering iron tools are good choice for welding circuit board,Home DIY hobbyists,appliance repair,jewelry welding.It's easy to be used no matter electronics hobbyist or beginner study electronic engineering.
1:The 80W soldering iron heats up quickly with a Inner-heated ceramic technology, high temperature stability, can protect your welding objects.
2:The soldering iron with high definition LCD screen display which indicates the temperature status more clearly.
3:The soldering iron kit comes with power switch button and temperature adjustment button, so It can be freely and easily to turn on/off or adjust the temperature that you need.
4:Made of Japan precision printing technology and the solder kit can be sintered at high temperature and keep a long time use.
5:If you want to learn how to solder, this soldering iron starter kit is perfect for your need. It’s very convenient and compact.
6:Non-slip soft rubber handle for maximum comfort and safe soldering.
Soldering Iron Length: 7.0 In
Cable Length: 57.5 In
Working Voltage: 110V / 220V
As shown in the figure
As shown in the figure
100% brand new and high quality Soldering Iron Tips
Solder Tip Lead-free Screwdriver 900M-T series for kada Hakko 936 937 8586 Rework
Station Tool Kit
100% brand new and high quality
Full 16 models as below:
These tips are plated with
fit for Hakko atten quick and other brand iron station
Solder Iron tip
Note: other models are required. Please leave a message.
Material: Alloy iron
Length: approx. 139mm
Plated with lead-free solder.
Lead-free alloy iron electric plating close-grained.
The tip size very precise.
Good performance in tin-on and tin melting.
Solder joints uniform, and fluent soldering.
High anti-oxidation, good moist performance, quick thermal conductivity.
High strength and hardness.
Durable in use.
For T12 heavy-duty series soldering iron.
Type:T12-BC1 BC1.5 BC2 BC3 BCF1 BCF2 BCF3 B B2 B4
1 x Solder Iron Tip
Suitable For Welding Repair Tools Of Hakko Welding Rework Station 900M-T-K Lead-Free Soldering Iron Tip 60W Soldering Iron
Our 5pcs 900M-T-K Knife Edge Style Lead-free Eco-friendly Soldering Iron Tips Pack must be a perfect spare kit for standby application. It is well packaged in a durable packing for convenient use. With high-strength and heat-resistant material adopted, our soldering iron tips pack is excellent in safety and performance. Easy to take and clean, it saves you lots of time, labor and energy when you're throwing yourself in maintenance and repair work. A regretless choice! Take it now! Features: 1. Small size and light weight 2. With long service lifetime and perfectly designed 3. Made of high-strength and heat-resistant material for durable use 4. It has high safety and stable performance 5. Quite easy to take and clean 6. Well packaged for convenient use Specifications: 1. Material: Aluminium Alloy 2. Color: Silver 3. Dimensions: (1.65 x 0.24)" / (4.2 x 0.6)cm (L x Dia.) 4. Weight: 1.05oz / 30g Package Includes: 5 x Soldering Iron Tools
5Pcs 900M-T Copper Lead Free Soldering Iron Tips SI/I/B/K/2.4D/1C Welding Head For Hakko Saike 936 852d 909D Soldering Station
*100% brand new and high quality
*Replacement Iron Tip for Hakko 936 Station, For 900M.933.376.907.913.951,898D,852D+
*Lead-free paint environmentally friendly soldering iron tip, high temperature resistance, more suitable for high melting point lead-free soldering
*Type B: (conical):
Features: B-type soldering iron tip is non-directional, the entire tip of the soldering iron can be welded.
Applications: Suitable for general welding, regardless of the size of the solder joints, you can also use a B-type soldering iron.
*C type (beveled cylindrical):
Features: Welding with the beveled part of the tip of the tip of the soldering iron, suitable for welding with a large amount of tin.
Scope of application: Suitable for welding machines that require multi-tin quantity, such as welding area with large welding area, thick terminal and large welding pad.
*K type (blade shape):
Features: use blade type part welding, vertical or pull-welded welding can be a multi-purpose tip.
Applications: Suitable for SOJ.PLCC.SOP.QFP. Power supply, grounding components, tin bridges, connectors, etc.
* Tips for maintenance:
1: Try to use low temperature soldering
High temperature will accelerate the oxidation of the tip and reduce the life of the tip. If the tip temperature exceeds 470 ° C, its oxidation rate is twice that of 380 ° C.
2: Do not apply too much pressure
When welding, do not apply too much pressure, otherwise the tip will be damaged and deformed. As long as the tip can fully contact the solder joint, the heat can be transferred. Also choose the appropriate tip to help heat transfer.
3: Always keep tin on the iron head
This can reduce the oxidation chance of the soldering iron tip and make the soldering iron head more durable. After use, the new solder should be added after the temperature of the soldering iron tip is slightly lowered, so that the tin plating layer has better anti-oxidation effect.
4: Keep the tip clean and instantly clean the oxide
If there is black oxide on the soldering iron tip, the soldering iron tip may not be tinned. At this time, it must be cleaned immediately. When cleaning, first adjust the temperature of the soldering iron tip to about 250 ° C, then clean the soldering iron tip with a cleaning sponge, and then on. Tin. Repeat the action until the oxide is cleaned.
5: Select low-activity flux
Highly active or corrosive fluxes will accelerate the corrosion of the soldering iron when heated, so low-corrosion fluxes should be used.
*Color: Black(As Pictures Show)
*Optional type: 900M-T-SI,900M-T-B,900M-T-I,900M-T-K,900M-T-2.4D,900M-T-1C(As Pictures Show)
*Diameter: 5mm (Approx.)
5*Soldering Iron Tips
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
【Fast Heating Thermostatic Design】:
With ceramic induction technology, internal heating, KLARYTYMA soldering iron is high heating efficiency and low energy consumption. Fast heating within 30 seconds, say goodbye to the long pre-heating time. Soldering iron uses a chip with constant temperature, automatically stops heating to a certain temperature. After the temperature drops down, the chip is heated again after induction.
【Excellent Soldering Iron with LCD Screen】:
With temperature control buttons and LCD temperature display, you can adjust the temperature from 200℃ to 450℃, read the temperature clearly, so it is less likely to over heat a circuit board. LCD display and temperature control switch makes job even easier and and professional.
【Soldering Iron with ON/OFF Switch】:
No need soldering station, just plug and use. With the on/off switch, it is convenient to turn the iron off when you need a break, no more having to turn off the unit by unplugging the iron from the wall socket all the time. At the same time, it can avoid long-time working, saving energy and ensuring safe welding.
【5 PCS Interchangeable Soldering Tips】:
Soldering iron tips vary in size and shape, are designed for different soldering scenarios, such as repairing guitar, watch, computer, hardware, TV, etc. How to replacing the tip? Loosen the metal sheath, take off the old tip, slid the new tip over the ceramic core and tightened down.
【What You Get】:
Package comes with 1 soldering iron, 5 extra soldering iron tips, 10 grams solder and soldering iron stand. Our soldering iron offers a 12-month warranty and lifetime technical support. We are dedicated to ensuring your 100% satisfaction, if you have any question, please feel free to contact us.
Why do you choose us?
1. Fasting Heating:
The 80W soldering iron heats up to the selected temperature within 30 seconds, with inner-heated ceramic technology, high temperature stability, can protect your welding equipment.
2. Digital Temperature Display:
The LCD screen makes it easy to see what temperature the iron is at and when it is ready the numbers stop blinking.
3. Adjustable Temperature Settings:
With TEMP+/- buttons, you can set your desired temperature (temperature range: 200~450℃）and keep that setting while soldering.
4. ON/OFF Button:
It is convenient to turn the iron off when you need a break, no more having to turn off the unit by unplugging the iron from the wall socket all the time.
5. Fast Cooling:
With heat-dissipation holes in steel pipe and bakelite, the soldering iron cools down quickly in a few minutes.
This soldering kit is intended for basic home repairs or sparking interest in your teenage child with electronics, and it's worth every penny with pretty darn good quality.
What you get?
Package comes with 1 soldering iron, 5 extra soldering iron tips, 1 cleaning sponge, 30 grams rosin, 10 grams solder wire and 1 soldering iron stand. Our soldering iron offers a 12-month warranty and lifetime technical support. We are dedicated to ensuring your 100% satisfaction, if you have any question, please feel free to contact us.
Soldering Iron x 1
Different Soldering Iron Tips x 5
Tin Wire Tube x 1
Soldering Iron Stand x 1
cleaning sponge x 1
Solder Paste x 1
Carry Bag x 1
Manual x 1
Free Gift(Random sending) x 1
How to solder
1).Determine the right temperature for your project. Which temperature to use depends on the materials you're joining and the kind of solder you're using.
2).Once your iron is heated to the appropriate temperature, pick up the iron by the handle in one hand and hold a piece of solder in the other hand. Hold the hot iron to the place where the two metal components will meet for about a second to heat them up. You want to heat the metal parts, not the solder itself.
Note: other models are required. Please leave a message.
1.T12 soldering head is a composite welding nozzle,which is a combination of heating core,temperature sensor and soldering head.
2.Refined copper is used as the main material,excellent thermal conductivity.
3.Special iron plating process,long service life,corrosion resistance and oxygen resistance.
4.The tip of soldering iron is protected by tin coating, which can stick tin better, resist corrosion and prolong service life.
5.The bottom of the soldering iron is made of special high temperature resistant material,which can prevent leakage and short circuit.
1.The T12 soldering head is a composite welding nozzle,which is a combination of heating core,temperature sensor and soldering head.
2.Suitable for fine spot welding,mobile phone disassembly welding,patch small components,etc.
Temperature regulation range: 50-450°
Max. power: 70W
Application: 951 950 942 welding bench
Package size:149x5x5mm/5.87x0.20x0.20 in
Package weight:9g / 0.32oz
1* Soldering Iron Tips